On Design of Parity Preserving Reversible Adder Circuits

In this paper novel parity preserving reversible logic blocks are presented and verified. Then, we present cost-effective parity preserving reversible implementations of Full Adder, 4:2 Compressor, Binary to BCD converter, and BCD adder using these blocks. The proposed parity preserving reversible BCD adder is designed by cascading the presented 4-digit parity preserving reversible Full Adder and a parity preserving reversible Binary to BCD Converter. In this design, instead of realizing the detection and correction unit, we design a Binary to BCD converter that its inputs are the output of parity preserving binary adder, and its output is a parity preserving BCD digit. In addition, several theorems on the numbers of garbage outputs, constant inputs, quantum cost and delay of the designs have been presented to show its optimality. In the presented circuits, the delay and the quantum cost are reduced by deriving designs based on the proposed parity preserving reversible blocks. The advantages of the proposed designs over the existing ones are quantitatively described and analysed. All the scales are in the Nano-metric area.     

Characterization of ion irradiated silicon surfaces ablated by laser-induced breakdown spectroscopy

Low energy metallic ions,generated by a Q-switched Nd:YAG laser(1064-nm wavelength,10-mJ energy,9-nm～12-ns-pulse width,10~(11)W/cm~2intensity)irradiated on a silicon substrate to modify various properties,such as electrical,morphological,and structural modifications.Thomson parabola technique is used to calculate the energy of these metallic ions whereas the electrical conductivity is calculated with the help of Four-point probe.Interestingly circular tracks forming chain like damage trails are produced via these energetic ions which are carefully examined by optical microscopy.It is observed that excitation,ionization,and cascade collisions are responsible for surface modifications of irradiated samples.Four-point probe analysis revealed that the electrical conductivity of substrate has reduced with increasing trend of atomic number of irradiated metallic ions(Al,Ti,Cu,and Au).The x-ray diffraction analysis elucidated the crystallographic changes leading to reduction of grain size of N-type silicon substrate,which is also associated with the metallic ions used.The decreasing trend of conductivity and grain size is due to thermal stresses,scattering effect,structural imperfections,and non-uniform conduction of energy absorbed by substrate atoms after the ion irradiation.     

Pd@tetrahedral hollow magnetic nanoparticles coated with N‐doped porous carbon as an efficient catalyst for hydrogenation of nitroarenes

Hollow magnetic nanoparticles (MNPs) with tetrahedral morphology were synthesized and then covered by a shell prepared by coating with melamine–formaldehyde followed by the introduction of glucose‐derived carbon. Subsequently, Pd nanoparticles were immobilized and the core–shell nanocomposite was carbonized. The obtained magnetic catalyst was successfully applied for the hydrogenation of nitroarenes in aqueous media. To investigate the effects of the morphology of MNPs, the nature of carbon shell, and the order of incorporation of Pd nanoparticles, several control catalysts, including the MNPs with different morphologies (disc‐like and cylinder); MNPs coated with different shells (sole glucose‐derived carbon or melamine–formaldehyde carbon shell); and a nanocomposite, in which Pd was immobilized after carbonization, were prepared and examined as catalyst for the model reaction. To justify the observed different catalytic activities of the catalysts, their Pd loadings, leaching, and specific surface areas were compared. The results confirmed that tetrahedral MNPs coated with porous N‐rich carbon shell exhibited the best catalytic activity. The high catalytic activity of this catalyst was attributed to its high surface area and the interaction of N‐rich shell with Pd nanoparticles that led to the higher Pd loading and suppressed Pd leaching.     

Polymer-Mercury Coated Screen-Printed Sensors for Electrochemical Stripping Analysis of Heavy Metals

In the perspective of in-field stripping analysis of heavy metals, the use and disposal of toxic mercury solutions (necessary to plate a mercury film on a carbon electrode surface) presents a problem. The aim of this work was the development of mercury coated screen-printed electrodes previously prepared in the lab and ready to use in-field. Thus some commercially available polymers like Nafion®, Eastman Kodak AQ29®, and Methocel® were investigated as mercury entrapping systems for electrochemical stripping analysis of heavy metals. Screen-printed disposable cells with a silver pseudo-reference electrode, a graphite counter electrode, and a graphite working electrode were used. To modify the sensor, the polymer solution was cast onto the carbon working electrode surface. Detection limits of 0.8 and 1 μg/L were obtained for lead and cadmium respectively. Since Methocel® based electrodes showed the best performance, they were used for the analysis of real samples. The results were compared with those obtained using a classical thin mercury film electrode and ICP spectroscopy.

All the experiments reported here were performed in un-deareated solutions as required for in-field analysis.     

OXIDATIVE DEPROTECTION OF TRIMETHYLSILYL ETHERS WITH HEXAMETHYLENETETRAMINEBROMINE SUPPORTED ONTO SILICA GEL UNDER MICROWAVE IRRADIATION IN SOLVENTLESS SYSTEM

Hexamethylenetetramine-bromine supported onto[3pc] silica gel rapidly converts trimethylsilyl ethers to their corresponding carbonyl compounds under microwave irradiation in solventless system.     

Flow and thermal study of MHD Casson fluid past a moving stretching porous wedge

Journal of Thermal Analysis and Calorimetry - This research provides the analysis of an analytical method named Homotopy analysis method which is applied to examine the series solutions/results on...